How to Measure

Guide to Measuring Your Window Face Fit or Outside Mount

Measure the outside of your window from the architraves. Measuring width first from left to right and ensure to measure the top of the window frame and not on the bottom.
Then Measure the drop from the top of the architraves down to the edge of the bottom architraves
Record your measurement in millimetres (mm), in order of Width and then Drop
Make sure to measure each window individually, specially on recess fit as every window has different measurement even though they look the same.
THE SIZE THAT YOU ENTER IN THE MEASUREMENTS OF YOUR ORDER ARE THE ACTUAL *SIZE OF THE BLINDS TO BE MADE FROM BRACKET TO BRACKET AND NOT THE FABRIC SIZE *A variance of +/- 2mm applies

Guide to Measuring Your Window Recess Fit or Inside Mount

Measure the inside of your window width first from left to right and ensure to measure the top of the window frame and not on the bottom.
Then Measure the drop from the inside of the window frame
Record your measurement in millimetres (mm), in order of Width and then Drop
Make sure to measure each window individually, specially on recess fit as every window has different measurement even though they look the same.
THE SIZE THAT YOU ENTER IN THE MEASUREMENTS OF YOUR ORDER ARE THE ACTUAL SIZE OF THE BLINDS TO BE MADE FROM BRACKET TO BRACKET AND NOT THE FABRIC SIZ

Guide to Measuring Blinds for Tilt & turn

For the frame and bracket to fit to the bead and glass, a minimum of 25mm clearance from the glass is required free of obstruction eg. handles, locks etc
Seals must not protrude over the glass by more than 6mm. If the seal is compressible, you can take a “bead to bead measurement. If not, then take a “seal to seal” measurement.
Using milimeter mm unit of measuremt, Measure both width and drop accurately, we recommend the use of of a metal tape measure.
Measure both corners and the middle and use the smallest measurement taken.Take 3 point measurment of the width then the drop and use the smallest measurment for your order.Avoid rounding off your measurements and take it to the last digit of the mm measurment. This will be your Width and Drop blinds sizes
To measure the window depth measure the face of window frame to the glass (normally range from 18mm to 24mm).Use a bank card or a ruller and place it accross the window frame corner and meausre it from the glass to the edge of the card or ruler. This will determine the window fixing brackets required.This will be your depth size meausurements

Watch the video click here